PREPARE THE WALL

1.Disconnect and move freestanding range from cabinet opening to provide easier access to upper cabinet and rear wall. Put a thick, protective covering over cooktop, set-in range or countertop to protect from damage or dirt.

2.Determine and clearly mark with a pencil the center line on the wall where the rangehood will be installed.

3.The canopy attaches to the wall by two mounting brackets (Item 1 in FIGURE 5). The canopy of the rangehood hangs on the two brackets which must be mounted with the flanges on the top of the bracket and pointing away from the wall. Before installing the brackets, the adjustment screws must be installed into the bottom of the bracket. These two screws are provided in the hardware package and have hexagon heads with a slot for a flat blade screwdriver. The dimensions illustrate mounting the canopy 24" above the cooking surface.

If a Backsplash is to be used with this rangehood, it must be installed before the rangehood. Installation instructions for the Backsplash are supplied in its box. The height of the Backsplash will determine the bottom edge of the canopy.

6.Determine the proper location for the Power Supply Cable (FIGURE 6). Use a 1 1/4" Drill Bit to make this hole. Run the Power Supply Cable. Use caulking to seal around the hole. DO NOT turn on the power until installation is complete.

30 MODELS

36 MODELS

FIGURE 6

INSTALL THE RANGEHOOD

1.Remove the unit from the carton and place on a flat sur- face for assembly. Cover the surface to prevent accidental damage. Remove all parts including the mounting hardware before discarding the carton.

2.Remove the grease filters from the unit and set aside. The grease filters are removed by pressing the handle in front of the filter (FIGURE 7). When replacing, make sure that the filters are properly positioned with the handles in front and visible.

FIGURE 7

3.Remove the cover from the field wiring compartment. Remove the wiring electrical knockout using a flat-blade screwdriver. Feed the Power Supply Cable through the electrical knockout.

FIGURE 5

4.The chimney mounts by two brackets (Item 2 in FIGURE 5). Note the position of the brackets. The top bracket should be installed about 1/8" away from the ceiling. The bottom bracket must be installed at the bottom point of the upper chimney sleeve.

Determine the proper location for each bracket and install the brackets on the wall. MAKE SURE THAT THE BRACKETS

ARE SECURELY FASTENED TO THE WALL.

5.Determine and make all necessary cuts in the wall for the ductwork. Install the ductwork before the rangehood.

4.Hang the canopy on the brackets as indicated in FIGURE 8. There are two rectangularholesontherear of the canopy. The brackets pass through these holes and the canopy hangs from the flanges on the brackets. Due to the weight of the canopy, two people should lift it to avoid injuries. Make sure that the canopy is se- cure on the brackets before releasing.

FIGURE 8

Version 9/05 - Page 6

Page 5 Page 7
Page 6
Image 6
Faber Perla installation instructions Prepare the Wall, Install the Rangehood, Are Securely Fastened to the Wall
Page 5 Page 7

Perla specifications

Faber Perla is a high-performance kitchen hood designed to enhance the cooking experience while maintaining an elegant aesthetic. This innovative appliance merges functionality with style, making it a popular choice among modern homeowners.

One of the standout features of the Faber Perla is its powerful extraction system. Equipped with advanced motor technology, this kitchen hood offers exceptional suction power, effectively eliminating smoke, odors, and steam generated during cooking. As a result, the air quality in the kitchen remains fresh, allowing culinary enthusiasts to focus on their craft without distraction.

The Faber Perla is designed with versatility in mind. It comes in various sizes and configurations to suit different kitchen layouts and styles. Whether you have a compact apartment kitchen or a spacious gourmet setup, there is a model that fits seamlessly into your space. The sleek, minimalist design complements any décor, making it a stylish addition to any home.

Another notable feature of the Faber Perla is its user-friendly interface. The intuitive controls allow for easy adjustment of fan speeds and lighting, ensuring that users can manage their cooking environment effortlessly. Many models are equipped with LED lights that provide ample illumination over the cooking surface, making meal prep safer and more convenient.

The technology behind the Faber Perla is impressive as well. Many units utilize advanced filtration systems, including aluminum mesh filters and optional charcoal filters. These filters efficiently capture grease and particulates, ensuring that the air extracted is clean. Moreover, the filters are washable and reusable, promoting easier maintenance and longer product life.

In addition to its performance and technology, the Faber Perla is engineered with noise reduction in mind. Many models feature sound-absorbing technology that minimizes operational noise, creating a more pleasant cooking environment. This is particularly beneficial for open-concept living spaces, where kitchen sounds can easily carry into adjoining areas.

Overall, the Faber Perla is a remarkable blend of efficiency, style, and advanced technology. With its powerful extraction capabilities, customizable features, and elegant design, it stands as a superior choice for anyone looking to elevate their kitchen experience while ensuring a clean and comfortable cooking atmosphere. Whether you're a passionate home chef or someone simple enjoying meal preparation, the Faber Perla offers both practicality and sophistication in one impressive package.
Top Page Image Contents