Other Installation Requirements

Cabinet Above

Cross

Section

750 mm 30”

750 mm (30”)

etc.) which could obstruct the air inlet under your induction cooktop.

Although induction-cooktop heat rejection is minimal and the unit does not create any fumes in operation, such unit must be installed underneath a properly sized ventilation hood for exhausting any smell, vapor and smoke created by cooking itself.

10 [3/8”]

Minimum

Clearance

Requirements

Exhaust

 

50 mm

(2”)

Air

 

 

Intake

Cabinet below

 

During cooking, built-in fan inside the cooktop will operate constantly to keep the internal components cool. The air intake is on the bottom of the cooktop box, and the warm air exhaust is located on the back of the rim, as shown on the schematic. If the air intake or the exhaust is obstructed, the cooktop safeties will either diminish the power output or shut down the unit.

We suggest that you should periodically check that there are no objects (dust, paper,

Also, a proper downdraft system can be used for ventilation.

A minimum vertical clearance of 750 mm [30”] is required between the top of the cooking surface and the bottom of any unprotected combustible material, such as cabinets, wooden trim etc.

In the back, leave a minimum of 10 mm [3/8”] between the cooktop edge and adjacent vertical surfaces (backsplash, wall, high cabinets etc.). This space is needed for the unit to breath properly.

If a downdraft ventilation system is used, a minimum of 6 mm (1/4”) of clearance is required between the rear edge of the cooktop and the downdraft snorkel.

Leave a minimum of 50 mm [2”] underneath the unit for the air intake.

Your cook-top must always breath adequately. Make sure that the air inlet and its exhaust are not obstructed.

The unit must not be installed above a washing machine, a refrigerator or a deep- freezer box

To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided.

The unit must be installed such that it can be pulled without difficulty out of the cut-out for servicing or cleaning.

Never glue, silicone or wedge the unit inside its cut-out.

7

Page 8
Image 8
Fagor America IFA-90 manual Other Installation Requirements, Cross Section

IFA-90 specifications

The Fagor America IFA-90 is an innovative and versatile appliance that has garnered attention for its outstanding performance and user-friendly features. Designed to simplify day-to-day cooking and food preparation, the IFA-90 caters to both professional chefs and home cooks alike, highlighting Fagor’s commitment to quality and efficiency.

One of the standout features of the Fagor IFA-90 is its advanced Induction cooking technology. Induction cooking is known for its rapid heating capabilities, providing precise temperature control while using less energy compared to traditional gas or electric stoves. This technology heats only the cookware, not the surrounding air, resulting in a safer cooking environment and quicker meal preparation. With its eco-friendly design, the IFA-90 stands out in a market increasingly focused on sustainability.

The IFA-90 comes equipped with a spacious cooking surface, allowing users to utilize multiple pots and pans simultaneously. This is particularly beneficial for larger families or those who enjoy entertaining guests. The appliance features multiple cooking zones that can accommodate various pot sizes, making it highly adaptable to different culinary tasks.

Ergonomically designed, the IFA-90 also features an intuitive control panel. The touch-sensitive controls provide users with an easy-to-navigate interface, allowing for quick adjustments to temperature and cooking settings. Users can select specific heat levels for each cooking zone, enabling them to switch between simmering and boiling smoothly.

Safety is a major concern with any kitchen appliance, and the IFA-90 addresses this with its built-in safety features. These include auto shut-off capabilities that prevent overheating, as well as a residual heat indicator that alerts users when the cooking surface is still hot, minimizing the risk of burns.

Additionally, the Fagor America IFA-90 is designed with ease of maintenance in mind. The smooth cooktop surface not only looks modern and sleek but is also simple to clean. Spills can quickly be wiped away without the need for harsh chemicals, making it an attractive option for those who prioritize cleanliness and hygiene in the kitchen.

In summary, the Fagor America IFA-90 is a top-tier induction cooktop that merges innovation with practicality. Its rapid heating technology, spacious cooking areas, user-friendly design, safety features, and ease of cleaning make it a standout choice for anyone looking to enhance their culinary experience. Whether for casual cooking or elaborate meal prep, the IFA-90 is poised to exceed expectations and inspire creativity in the kitchen.