EN |
| 3 / INSTALLING YOUR TUMBLE DRYER |
|
|
|
• ELECTRICAL CONNECTION
EN 4 / PREPARING YOUR ITEMS
• CHECKING THE CONDITION OF YOUR TEXTILES
The dryer must be installed in accordance with all local codes or, in the absence of a local code :
—in the U.S.A., in accordance with the National Electric Code, ANSI/NFPA 70 - latest edition/State and Municipal codes and/or local codes.
—in Canada, in accordance with the Canadianl Electric Code, C22.1 - latest edition/Provincial and Municipal codes and/or local codes.
Danger :
To make the electrical connection to your appliance :
—Do not use an extension, an adapter, a multiple socket or a programmable timer.
—The plug must be easily accessible but be out of children’s reach.
—If there's any doubt about the condition of your installation, contact your installer or a qualified
—Never eliminate the electrical Earthing system.
The Dryer comes with a 16AWG Cord and NEMA
It should be connected to a 240V, 15A, 60Hz AC 2 Phases + wire grounding power outlet (NEMA
We cannot be held responsible for any incident caused by poor electrical installation.
• REPLACING THE ELECTRIC POWER CABLE
Advice :
If, before you insert your clothes in the tumble dryer, you notice any stains, even after washing, do not dry the items concer- ned. As a general rule, stains that have been ironed or
Please refer to the instructions for treating stubborn stains provided in most washing machine instruction manuals and, in particu- lar, wash the stained items again.
• Preparing your items :
—Close all zippers and snap buttons.
—Remove any loose buttons, pins or hook fasteners.
—Knot any belts, apron strings, etc...
—Empty pockets.
—Always adhere to the manufacturer's ins- tructions when using softening products.
Important :
Do not tumble-dry the following articles :
—Clothing including rubber like materials (for example: shower caps, waterproof clothing and textiles, linings, pillows etc.)
—Chlorofibres (Thermolactyl* for example) *Registered trademark
—Items containing underwiring that could become detached
—Bulky items (duvets, eiderdowns, etc...)
—Laundry that has not been spun
—Laundry cleaned with inflammable chemi- cals.
Important :
Check the labels on your textiles
Normal |
|
| Gentle |
|
|
|
|
| |||
drying |
|
| drying |
|
|
Do not tumble dry |
|
|
| ||
|
|
|
|
|
|
Important :
To ensure your safety, this must be carried out by the manufacturer's
Advice :
In order to easily find your appliance’s reference numbers in the future, we recommend that you note them down on the
Your appliance complies with UL 2158 (Electric clothes Dryer).
10
• INSERTING YOUR ITEMS IN THE DRUM
—Open the door by pushing (press where the label is) (Fig. 06).
—Check that the filter is in its housing .
—Insert washed and spun clothes loosely in the drum without folding it or piling it up.
—Take care not to let any fabrics get caught in the door.
—Close the door.
•Recommended volumes :
The maximum capacity of the dryer is 8 kg.
—To reduce creasing and optimize drying times, we recommend you do not overload the machine.
Fig. 06
11
