Fantom Vacuum AP500H owner manual Troubleshooting, Features Of Your Programable Air Purfier

TROUBLESHOOTING

FEATURES OF YOUR PROGRAMABLE AIR PURFIER

This appliance was inspected thoroughly and was in good operating condition when it was shipped from the factory. If a minor problem occurs, it usually can be solved quite easily when the cause is found. Therefore, this checklist is provided for your convenience.

PROBLEM		POSSIBLE CAUSE		POSSIBLE SOLUTION
			1. Press the “On/Off” power
	1.	“On/Off” power button has		button.
Unit will not		not been pressed.	2.	Check to make sure the unit is
	2.	Unit is not plugged in.		plugged in.
operate	3.	The air intake grill has not	3.	Check to make sure the filters
		been installed and locked		are properly installed and the
		into place.		air intake grill is installed and
				locked into place.
			1.	Make sure nothing is in front of

1.HEPA Filter

The HEPA filter will stop most dust particles and airborne allergens that pass through the filter. It will capture 99.97% of particles as small as 0.3 microns – many times smaller than a human hair.

2.Ultraviolet Lamp

The ultraviolet lamp can help kill bacteria and molds that pass through the filter. The result is a cleaner air output from the air purifier.

6.Neutralize

The UV and photo-catalysis process helps decompose odors in the air like formaldehyde, alcohol and

ammonia.

NOTE: The neutralize function is a silent feature, the only way to know if it is “On” is with the indicator light.

7.Fan Speed Settings

There are four fan speeds and an auto fan speed setting to clean your air more efficiently.

Reduced air	1.	The air intake or air outlet		or on top of the unit.
		grill may be blocked.
flow or poor			2.	Check the HEPA filter indicator
	2.	The HEPA filter may be
filtering				light. Replace the HEPA filter if
		clogged.
				this indicator is lit.
The filter			1.	Turn on the machine, then
indicator is lit
	1.	The unit has not been		press and hold the TIMER
after the filter
		reset.		control button until the filter
has been
				indicator is off.
replaced.
The power light
indicator lamp	1.	The unit needs to be	1.	Unplug the unit and reinsert the
flickers quickly
		reset.		plug after 10 seconds.
(5 times per
second).
The filter
indicator light	1.	The unit needs to be	1.	Unplug the unit and insert the
flickers quickly
		reset		plug after 10 seconds.
(5 times per
second)

3.Ionizer

Filling the air with negative ions

helps to freshen the air.

NOTE: The ionizer function is a silent feature, the only way to know if it is “On” is with the indicator light.

4.Built-in Dust Sensor

Automatically adjusts the air flow through the air cleaner to help clean the air more efficiently.

5.Built-In Odor Sensor

This sensor monitors the air quality in the room and can detect tobacco, pet, cosmetic and alcohol-aerosol odors.

8.Timer

Set the air purifier to shut off after a specified number of hours.

9. Set-Up

Pre-program the unit to turn “On”, turn “Off”, and select the fan speed that would be desired.

10.Change Filter Indicator

This indicator reminds you when filters require replacing.

10

3