BALAYEUSE À MAIN SANS CORDON
Modèle FM1705K
3.6 volts CD
Facultatif
1. | Commutateur marche/arrêt | 5. | Brosse rotative |
2. | Voyant de recharge | 6. | Prise de recharge |
3. | Plateau à poussière | 7. | Manche pivotant |
4. | 8. | Adaptateur de recharge | |
|
| 9. | Bloc chargeur avec |
|
|
| support mural (facultatif) |
REMARQUE: Lors de l’envoi, les piles de la balayeuse à main sans cordon modèle ne sont pas chargées. Vous devrez charger les piles pendant 24 heures avant l’usage initial. Utilisez des piles de rechange XSB705 seulement.
Care and Maintenance
To improve the performance and life of your unit, we recommend you do the following:
1.Once a month clean the unit with a dry cloth, including the chamber into which the dust tray fits. Remove any hair, fiber or other materials that may have built up in the chamber and on the rotating brush.
2.Don't use abrasive materials to clean the hand sweeper. Do not immerse the unit in water.
3.Do not pick up liquids or use on wet floors.
4.Do not use on concrete, tar or similar rough surfaces .
5.Don't pick up pieces of string or fabrics with the sweeper.
6.Do not clean tasseled or frayed carpets with the sweeper.
7.To remove the squeegee, turn the screw plug a quarter turn counter clockwise and slide the squeegee out. Slide the new squeegee in and then turn the screw plug a quarter turn clockwise to lock the squeegee in place. For replacement squeegees, call 1 (800)
TROUBLESHOOTING GUIDE
PROBLEM |
| POSSIBLE REASON |
| POSSIBLE SOLUTION | |
|
|
|
|
| |
| 1. | Batteries discharged. | 1. | Charge unit. | |
| 2. | No power in electrical | |||
SWEEPER WILL NOT | 2. | Check fuse or breaker. | |||
| outlet supplying | ||||
OPERATE |
|
| Replace fuse/reset breaker. | ||
| transformer. |
| |||
|
| 3. | Call Customer Service. | ||
| 3. | Unit needs servicing. | |||
|
|
| |||
|
|
|
|
| |
SWEEPER WILL NOT | 1. | Dust tray is full. | 1. | Empty dust tray. | |
2. | Unit needs recharging. | 2. | Charge unit. | ||
3. | Brush bar dirty. | 3. | Clean brush bar. | ||
| |||||
|
|
|
|
| |
DUST ESCAPING | 1. | Dust tray is full. | 1. | Empty dust tray. | |
FROM SWEEPER | 2. | Brush bar dirty. | 2. | Clean brush bar. | |
|
|
|
| ||
|
|
| 1. Check for excessive material | ||
ROTATING BRUSH | 1. | Unit clogged. |
| on brush or in bottom of | |
| sweeper. Remove obstruction | ||||
WILL NOT PICK UP | 2. | Dust tray is full. |
| ||
| from brushes and/or sweeper. | ||||
|
|
|
| ||
|
|
| 2. Empty and clean dust tray. | ||
|
|
|
|
| |
| 1. | Electrical outlet not | 1. Check to ensure outlet is | ||
|
| working | |||
|
|
| working properly. (Easily | ||
| 2. | Charging Adapter not |
| ||
|
| checked by plugging in | |||
SWEEPER WILL NOT |
| working |
| ||
|
| another appliance. | |||
CHARGE | 3. | Batteries no longer |
| ||
2. | Replace charging adapter | ||||
|
| functioning | |||
|
| 3. See battery disposal pg. 6. | |||
| 4. | On/Off switch is in the ON | |||
| 4. | Depress On/Off switch. | |||
|
| position. | |||
|
|
|
| ||
|
|
|
|
| |
18 | 7 |
