PROBLEM SOLVING
This appliance was inspected thoroughly and was in good operating condition when it was shipped from the factory. If a minor problem occurs, it usually can be solved quite easily when the cause is found. Therefore, this checklist is provided for your convenience.
PROBLEM |
| POSSIBLE CAUSE |
| POSSIBLE | |
| 1. | Not properly plugged into | 1. | Plug in firmly. | |
Cleaner Won’t |
| wall outlet. | 2. | Check fuse or breaker. | |
2. | No electricity in wall outlet. | 3. | Push on/off switch to on | ||
Run | 3. | On/Off switch not turned on. | 4. | Reset motor thermostat. (page 8 ) | |
| 4. | Motor thermostat tripped. | 5. | Reset circuit breaker or replace | |
| 5. | Blown fuse/tripped breaker. |
| fuse. | |
|
|
|
|
| |
| 1. | Full or clogged dust cup. | 1. | Clean dust cup. (page 5) | |
| 2. | Wrong pile height setting. | 2. | Adjust setting. (page 5) | |
| 3. | Clogged nozzle. | 3. | Remove obstruction. | |
| 4. | Clogged dust inlet port. | 4. | Remove power head cover and | |
Cleaner Won't | 5. | Clogged hose. |
| remove obstruction. | |
6. | Broken belt. | 5. | Remove obstruction. | ||
Pick Up | 7. | Hose not inserted fully. | 6. | Replace belt. (page 8) | |
| 8. | Dirty filters. | 7. | Push hose in securely. | |
| 9. | HEPA filter needs cleaning | 8. | Clean / change filters. (page 7) | |
|
| or replacing. | 9. | Clean or replace HEPA filter. | |
| 10. | HEPA filter frame needs |
| (page 6) | |
|
| cleaning. | 10. | Clean HEPA filter frame. (page 6) | |
|
|
|
|
| |
Cleaner Picks |
|
|
|
| |
Up Moveable |
|
|
|
| |
Rugs Or | 1. | Wrong pile height setting. | 1. | Adjust setting. (page 5) | |
Pushes Too |
|
|
|
| |
Hard |
|
|
|
| |
Agitator Does | 1. | Broken belt. | 1. | Replace belt. (page 8) | |
2. | Check belt changing and agitator | ||||
Not Turn | 2. | Belt installed incorrectly. | |||
| cleaning. (page 8) | ||||
|
|
|
| ||
|
|
|
|
| |
Air Flow |
|
|
|
| |
Restricted | 1. | Attachment use restricts air |
|
| |
With |
| flow. | 1. | Check attachment. (page 4) | |
Attachment | 2. | New carpet debris clogging | 2. | Remove obstruction. | |
Use Sound |
| air path. |
|
| |
Changes |
|
|
|
| |
|
|
|
|
|
10
GETTING TO KNOW YOUR CYCLONIC BAGLESS
UPRIGHT
1. | Upper Handle | 10. | Flexible Hose |
2. | On/Off Switch | 11. | Power Cord |
3. | Dust Cup Release Button | 12. | Quick Release Power Cord Holder |
4. | Dust Cup | 13. | Round Brush |
5. | HEPA Filter Frame | 14. | Upholstery Brush |
6. | Carpet Height Selector | 15. | Crevice Tool |
7. | Furniture Guard | 16. | Extension Tubes (x2) |
8. | Head Light | 17. | Hose Connector |
9. | Motorized Power Head | 18. |
Technical Specifications
Voltage: | 120V., 60Hz. |
Power: | 12 Amps |
Note: Illustrations may differ from actual unit.
3
