TROUBLESHOOTING
If there is a problem with the vacuum cleaner, carry out the following checks to find the cause. If the problem still persists after the checks have been made, do not use the vacuum cleaner to prevent the possibility of an accident occurring. Turn the ON/OFF switch to the "OFF" position, disconnect the power cord from the wall outlet, and contact FANTOM Customer Service at
Prob lem | Caus e | Remedy | |
The motor does not operate | The power cord plug is not | Insert the power cord plug | |
when the ON/OFF switch is | securely inserted into the | securely into the wall | |
set to the "ON" position. | wall outlet. | ||
outlet.(refer to page 5 ) | |||
|
| ||
|
|
| |
Suction force is weak. | The dust compartment is full. | Empty the dust compartment. | |
| The suction hose is blocked. | (refer to page 9) | |
| Remove the blockage. | ||
| The nozzle head is blocked. | (refer to page 11) | |
| The filters (main filter, pre- | Remove the blockage | |
| (refer to page 11) | ||
| filter and the secondary | ||
| Clean the filters. | ||
| filters) are dirty. | (refer to page 9) | |
|
| Replace the.HEPA filter | |
|
| (refer to page 10) | |
|
| Clean the | |
|
| (refer to page 10) | |
|
|
| |
The noise is loud. | The agitator is dirty. | Clean the agitator. | |
|
| (refer to page 11 ) | |
The agitator does not | The flat belt is worn or | Replace the flat belt. | |
operate. | broken. | (refer to page 13 ) | |
| The agitator is worn or | Replace the agitator. | |
| broken. | (refer to page 14 ) | |
|
|
|
TO ORDER REPLACEMENT FIL TERS CALL
16
