USING THE ATTACHMENTS
Caution: When using the attachments during cleaning, set the vacuum cleaner to the upright position.
Disconnect the hose from the vacuum
1 cleaner.
Pull the hose gently in the direction of the arrow to disconnect it.
Hose
Hook the hose holder onto the
2 holder mount.
Caution:
Before using the attachments, please make sure the hose is hooked on the holder mount.
Hose
Holder
3 Remove the wands from the vacuum cleaner.
Two wands are contained together. Pull out the second wand as shown.
2 
Holder
Mount
1
Caution: |
| Wands |
Crevice | Second | |
When removing the attachments,pull | Wand | |
Tool |
| |
them in the directions shown in the |
|
|
illustration.Pulling them in the wrong |
|
|
direction or pulling them forcefully may |
|
|
cause damage to the attachment ribs. |
|
|
4 Install the wand to the hose.
To achieve maximum reach with the attachments,attach the crevice tool to the end of the wand.
Securely and firmly connect the wand to the hose while twisting the wand, as shown in the illustration below.
The end of the wand which has the marking of 
should be connected to the hose.
The upholstery tool & dusting brush can be attached directly to the wand, hose or the end of the crevice tool. Refer to the illustration for the correct way to position the upholstery tool & dusting brush.
| Wands | Crevice Tool |
|
| Crevice Tool |
|
| Wand |
Hose | Upholstery |
|
|
| |
| Tool | Dusting Brush |
|
| |
|
| Hose |
| Crevice Tool |
|
Upholstery tool & Dusting brush
To detach the dusting brush from the upholstery tool: Press the tabs on the brush downward to remove it.
To reattach the dusting brush to the upholstery tool: Insert |
|
the front of the upholstery tool under the hook on the front of the |
|
dusting brush. Press down on the back of the upholstery tool to | Tabs |
snap it into place under the dusting brush tabs. |
7
