Fantom Vacuum FM740 B instruction manual Cleaning the Filters, Cleaning utensil

CLEANING THE FILTERS

1 Remove the dust compartment.(refer to page 8)

Set the dust compartment to the

2 parallel position. Open the trapdoor, then push the release button B and pull out the main filter.

The main filter and prefilter will be removed at the same time.

Caution: Do not push the release button B at the upright position. As this may drop or damage the main filter and prefilter.

Release

Button B

3

Clean the main filter and prefilter with a soft-bristled brush and rinse with cold water.

3 Allow both items to dry completely.

Caution:

Do not use a hard-bristled brush to clean filters. This may result in damage to the filters.

Do not attempt to dry with a hair dryer or by placing in a clothes dryer. Hot air may cause the filters to warp.

Cleaning utensil

To maintain optimum suction power, the dust filter fins should be kept clean of dirt. Clean the filter fins free of dirt with the end of fork as shown.

Fork

Reattaching the filters

1 Insert the main filter into the prefilter as shown.

Prefilter

Main Filter

3 Close the trapdoor.

Hold onto the main filter and insert into

2 the dust compartment.

Align the ribs of the main filter to match the shape of the hole in the dust compartment and press firmly to insert.

Dust Compartment

Ribs

9