Lexmark 200, 20E manual Cleaning the exterior of the printer, Cleaning the printhead nozzles, Notes

Maintaining the printer 133

Cleaning the printhead nozzles

Poor print quality is sometimes due to clogged printhead nozzles. Clean the printhead nozzles to improve the quality of your prints.

Notes:

•Cleaning the printhead nozzles uses ink, so clean them only when necessary.

•Deep cleaning uses more ink, so try the Clean Printhead option first to save ink.

•If the ink levels are too low, then you must replace the ink cartridges before you can clean the printhead nozzles.

1From the home screen, touch > More Options.

2 Touch Clean Printhead or Deep Clean Printhead.

3 Select an option, and then wait until the printer is ready.

Cleaning the exterior of the printer

1Make sure that the printer is turned off and unplugged from the wall outlet.

CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding.

2Remove all paper from the printer.

3Dampen a clean, lint‑free cloth with water.

Warning—Potential Damage: Do not use household cleaners or detergents, as they may damage the finish of the printer.

4Wipe only the outside of the printer, making sure to remove any ink residue that has accumulated on the exit bin.

Warning—Potential Damage: Using a damp cloth to clean the interior may cause damage to your printer.

5Make sure the printer is dry before beginning a new print job.