Lexmark 200, 20E manual Printing, The Memory Device screen appears on the display, Notes

Printing 45

Inserting a memory card Inserting a flash drive

Notes:		Notes:
•	Insert the card with the brand name label facing up.	•	The flash drive uses the same port that is used
			for a PictBridge camera cable.
•	Make sure any arrows on the card point toward the printer.
		• An adapter may be necessary if your flash
•	If necessary, connect the memory card to the adapter that came
			drive does not fit directly into the port.
	with it.

•Make sure that the memory card inserted is supported by the printer. For more information, see “Supported memory cards and file types” on page 46.

•The card reader light comes on when a memory card is inserted and blinks when a memory card is being accessed.

Warning—Potential Damage: Do not touch any cables, any network adapter, any connector, the memory device, or the printer in the areas shown while actively printing, reading, or writing from the memory device. A loss of data can occur.

The Memory Device screen appears on the display.

Notes:

•If the printer does not recognize the memory device, then remove and reinsert it.

•If a flash drive or a digital camera set to mass storage mode is inserted into the USB port while a memory card is in the card slot, then the display prompts you to choose which memory device to use.