Lexmark 20E, 200 Installing the printer on an Ethernet network, Configuring 802.1X Authentication

Networking 108

EAP‑TLS

•RADIUS user name

•CA certificate

•Signed certificate

EAP‑TTLS

•Appropriate inner authentication

•RADIUS user name

•RADIUS password

•CA certificate

Configuring 802.1X Authentication

The information to complete is dependent on the 802.1X security mechanism you select. Some require user names, passwords, and/or certificates. If your network contains multiple access points with different modes of authentication, then you can select and configure more than one authentication mechanism.

1From the Configure 802.1X Authentication dialog, select an authentication mechanism.

If you have selected	Do this
EAP‑MD5, LEAP, or	Proceed to the next step.
MSCHAPv2
PEAP or EAP‑TTLS	Click Install CA Certificate, and then type the path to the CA certificate, or click Browse to
	locate the certificate file.
EAP‑TLS	a Click Install Signed Certificate, and then type the path to the signed certificate, or click
	Browse to locate the certificate file.
	b Click Install CA Certificate, and then type the path to the CA certificate, or click Browse
	to locate the certificate file.

2Type the necessary information that the authentication server requires.

3 Click OK, and then follow the instructions on the computer screen.

Installing the printer on an Ethernet network

Information you will need to set up the printer on an Ethernet network

Make sure you have the following information before you begin:

•A valid, unique IP address for the printer to use

•The gateway for the network

•The network mask of the network where the printer will be used

•The name of the domain where the printer will reside