Lexmark 200, 20E manual About your printer

About your printer			11
		Use the	To
	2	ADF input tray	Load original documents into the ADF.
			Notes:
			• Do not load postcards, photos, small items, or thin media (such as magazine
			clippings) into the ADF. Place these items on the scanner glass.
			• After scanning, copying, or faxing, you can lift the right end of the input tray to
			retrieve the original documents easily.
	3	PictBridge and USB port	Connect a PictBridge-enabled digital camera or a flash drive to the printer.
	4	Card reader light	Check the card reader status. The light comes on when a memory card is inserted and
			blinks when a memory card is being accessed.
	5	Memory card slot	Insert a memory card.
	6	Ink cartridge access door	Install, remove, or replace ink cartridges.
	7	Paper tray (Tray 1)	Load paper.
	8	Second paper tray (Tray	Load additional paper.
		2)	You can load the same type of paper as in Tray 1. You can also load a different type of
		Note: This option is	paper and change the default paper settings so the printer uses paper from Tray 2 for
		available only on select	certain types of print jobs.
		printer models.
	9	Exit bin	Hold paper as it exits.
			Note: For the printer to be ready for any print job, make sure to fully extend the exit
			bin and to flip out the bin extender.
	10	Bin extender	Catch the paper as it exits.
			Note: For the printer to be ready for any print job, make sure to fully extend the exit
			bin and to flip out the bin extender.
11		Printer control panel with	Operate the printer.
		touch screen

	Use the	To
12	Customer support	Identify the model number of the printer, the customer support hot line, and the ink
	label	cartridge information.
13	Scanner glass	Scan, copy, or fax photos and documents.