Lexmark 20E, 200 Setting the page dry time, Using the printer software, Using the control panel

Loading paper and original documents 36

Using the printer software

For Windows users

1With a document open, click File > Print.

2Click Properties, Preferences, Options, or Setup.

3Click the Paper/Finishing tab, and then select the size or type of paper to use, and the paper source or tray.

4 Click OK.

For Macintosh users

1With a document open, choose File > Page Setup.

2From the Page Setup dialog, set the printer, paper size, and orientation.

3 Click OK.

4 From the menu bar, choose File > Print.

5 From the Printer pop‑up menu, choose your printer.

6 From the print options pop‑up menu, choose Quality & Media.

7 From the Paper Type pop‑up menu, choose the type of paper to use.

Setting the page dry time

Using the control panel

From the home screen, navigate to:

> Print Mode Setup > Page Dry Time > select a dry time setting > Accept

Note: The dry time varies depending on the print quality selected for the print job. Select Extended to extend the dry time for your prints.

Using the printer software

For Windows users

1Click File > Print.

2Click Properties, Preferences, Options, or Setup.

3Navigate to:

Layout tab > Print on Both Sides (Duplex) area > select a dry time setting

Note: Under conditions of high humidity, or if the normal drying time does not allow the ink to dry completely, select Extended.

4Click OK.