Lexmark 200, 20E manual Clearing paper jams, USB Hub Not Supported, Paper jam in the printer, Notes

Troubleshooting 151

USB Hub Not Supported

Remove the unrecognized USB hub.

Clearing paper jams

•“Paper jam in the printer” on page 151

•“Paper jam in the duplex unit” on page 151

•“Paper jam in the ADF (select models only)” on page 152

•“Paper or specialty media misfeeds” on page 153

Paper jam in the printer

Note: The parts inside the printer are sensitive. Avoid unnecessarily touching these parts while clearing jams.

1Check the paper tray, exit bin, or jam clearance area for any jammed paper.

Notes:

•For select models that support a second tray, make sure you also check the second tray.

•If the paper tray was removed, then make sure you do not replace the tray until the jam is cleared.

•Make sure you do not tilt the printer when checking the jam clearance area. Grasp and pull the latch under the printer control panel to open the printer.

•Before clearing the jam, make sure the printhead is moved to the side and away from the jammed paper.

2Firmly grasp the paper, and then gently pull it out.

Note: Be careful not to tear the paper while removing it.

3If necessary, close the printer to clear the message.

Paper jam in the duplex unit

Note: The parts inside the printer are sensitive. Avoid unnecessarily touching these parts while clearing jams.