Lexmark 200, 20E manual Scanning to a network computer, Scanning to a network folder, Notes

Scanning 61

3Select the output file type you want to create and other scan options. If necessary, touch Accept each time you make a selection.

4Press .

The scan is complete when a message appears on the printer control panel indicating that the file you scanned has been saved.

Scanning to a network computer

1Load the original document.

2From the home screen, touch Scan > Computer.

3 Touch the name of the destination computer.

Notes:

•Make sure the scan software is installed on the destination computer.

•Make sure the printer can communicate with the destination computer.

•You may be prompted to enter a PIN if the computer requires it.

•To assign a computer name and a PIN to the computer, see the Help for the printer software associated with your operating system.

4Select the output file type you want to create and other scan options. If necessary, touch Accept each time you make a selection.

5Press .

The scan is complete when a message appears on the printer control panel indicating that the file you scanned has been saved.

Scanning to a network folder

Notes:

•This feature may not appear in the Embedded Web Server, depending on your printer model.

•Make sure you have created a folder shortcut before you begin. For more information, see “Adding a network folder shortcut” on page 62.

1Load the original document faceup into the ADF or facedown on the scanner glass.

2From the home screen, navigate to: Scan > Network Folder

3Select the name of the network shared folder you want.

You may be prompted to enter your user name and password.

4Set the color, quality, original image size, and other scan options. If necessary, press each time you make a selection.

5Press .

Note: For Macintosh users, you may need to enable scanning to your computer through Image Capture to scan documents using a network printer and save the scan output.