Lexmark 20E Special wireless installation instructions, Before you begin, For Macintosh users

Networking		104
	Indicator	Printer status
		• The printer is out of the range of the access point (wireless router).
		• The printer is trying to communicate with the access point, but the access
	or	point is turned off or is not working properly.
		• The access point has been turned off and turned back on, and the printer
	Wi‑Fi indicator light is blinking green
		is trying to establish connection with the network.
		• The wireless settings of the printer may no longer be valid.
		Check if the SSID, WEP key or WPA/WPA2 passphrase, security type, and
		IP address that the printer uses are still correct.
		• The printer is connected to a wireless network and is ready for use.
		• The printer is connected to your computer through an ad hoc connection.
	or
	Wi‑Fi indicator light is solid green

Special wireless installation instructions

The following instructions apply to customers outside of North America who are using a wireless broadband box. Some examples of these boxes include LiveBox, AliceBox, N9UF Box, Freebox, and Club Internet.

Before you begin

•Make sure your box is wireless‑enabled and activated to work on a wireless network. For more information about configuring the box to work wirelessly, see the documentation that came with your box.

•Make sure your box is turned on and that your computer is on and connected to your wireless network.

Adding the printer to your wireless network

1Set up your printer for wireless networking using the setup instructions provided. Stop when you are prompted to select a network.

2If there is an association/registration button on the back of your box, then press it before selecting a network.

Note: After pressing the association/registration button, you have five minutes to complete the printer installation.

3Return to the computer screen.

From the wireless networks list that appears, select your network, and then click Continue.

If your wireless network does not appear in the list, then: a Connect to another wireless network.

For Windows users

Click Unlisted Network.

For Macintosh users

Select Other Wireless Network from the list, and then click Continue.