Lexmark 200, 20E manual Loading paper and original documents

Loading paper and original documents		31
	Load up to	Make sure
	25 sheets of labels	• You use full label sheets. Partial sheets (with areas exposed by missing
		labels) may cause labels to peel off during printing, resulting in a paper
		jam.
		• You load A4‑ or letter‑size label sheets.
		• The labels are loaded with the printable side facedown.
		• The top of the labels feeds into the printer first.
		• The paper guides rest against the left, right, and bottom edges of the label
		sheets.
	50 transparencies	• The transparencies are loaded with the rough side facedown.
		• You load A4‑ or letter‑size transparencies.
		• You remove any paper backing sheets from the transparencies before
		loading.
		• If the transparencies have a removable strip, then each strip faces down.
		• The paper guides rest against the left, right, and bottom edges of the
		transparencies.
		Note: Transparencies require more drying time. Remove each
		transparency as it exits, and allow it to dry to avoid ink smudging.
	10 iron-on transfers	• You follow the loading instructions that came with the iron-on transfers.
		• The transfers are loaded with the printable side facedown.
		• The paper guides rest against the edges of the transfers.
		Note: For best results, load transfers one at a time.
	25 index cards, photo papers, or postcards	• The thickness does not exceed 0.025 inches (0.635 mm).
		• Photo paper is loaded with the printable side facedown.
		• You load the photo paper in the center of the tray.
		• The paper guides rest against the left, right, and bottom edges of the
		paper.

Note: For best results, allow photos to dry at least 24 hours before stacking, displaying, or storing.