Lexmark 200, 20E manual Installing the printer on a wireless network, Encryption, For Windows users

Networking 101

Encryption

Check the encryption method used on your network.

Note: Some authentication types may be available only in select printer models or operating systems.

Authentication type Encryption method

Open Mode	•	None
	•	WEP
Shared Mode		WEP
WPA Personal		TKIP
WPA2‑Personal	•	TKIP
	•	AES
WPA2‑Enterprise	•	TKIP
	•	AES
802.1X ‑ RADIUS	•	None
	•	WEP‑DynamicKeys
	•	WEP‑StaticKeys
	•	WPA‑TKIP
	•	WPA‑AES

Installing the printer on a wireless network

Before you begin, make sure that:

•Your wireless network is set up and working properly.

•The computer you are using is connected to the same wireless network where you want to set up the printer.

•You know the network name (SSID) and the WEP key or WPA/WPA2 preshared key/passphrase of the wireless network you want to connect to.

For Windows users

1Close all open software programs.

2Insert the Software and Documentation CD.

If the installation dialog does not appear after a minute, then launch the CD manually:

aClick , or click Start and then click Run.

bIn the Start Search or Run dialog, type D:\setup.exe, where D is the letter of your CD or DVD drive. c Press Enter, or click OK.

3Click Install, and then follow the instructions on the computer screen.

Note: Select Wireless connection when prompted to select a connection type.