Lexmark 20E, 200 Scanning a two‑sided document using the ADF, Adding a network folder shortcut

Accept each time you

4 Select the output file type you want to create.

5 Set the color, quality, original image size, and the other scan options. If necessary, touch make a selection.

Load the original document.

From the home screen, touch Scan > Memory Device. Insert the flash drive or memory card.

Notes:

• The printer reads only one memory device at a time.

• If a flash drive is inserted into the USB port while a memory card is in the card slot, then a message appears on the display prompting you to select which memory device to use.

1

2

3

The scan is complete when a message appears on the printer control panel indicating that the file you scanned has been saved.

Scanning to a flash drive or memory card

Before you begin, make sure your flash drive or memory card is not write‑protected.

Scanning 62

Adding a network folder shortcut

1On your computer, create a shared folder with read/write access.

2On a Web browser, type your printer IP address, and then press Enter.

3Navigate to either of the following:

•Settings > Scan‑to‑Network Folder Setup

•Settings > Manage Shortcuts > Add New Shortcut > Scan to Network

4Enter the necessary information, and then click Add.

Note: To avoid unsaved changes to your settings, make sure the network folder shortcut name is different from that of your folder name.

Scanning a two‑sided document using the ADF

Depending on your printer model, the ADF can scan duplex (two-sided) pages in a single pass.

1Load an original document faceup into the ADF.

2 Adjust the paper guides.

3 From the home screen, touch Scan.

4Follow the instructions on the display, and then set the other scan options. If necessary, touch Accept each time you make a selection.

Note: From the Sides menu in Scan Options, make sure you select 2‑Sided, and then touch Accept.

5Press .

6Follow the instructions on the display.