USING THE ATTACHMENTS
Caution: When using one of the attachments during cleaning,set the vacuum cleaner to the upright position.
Pet Hair Attachment
Assemble the attachments on the suction hose A or B.
Assemble the accessories as shown below
Wand | Pet Hair |
Handle | Attachment |
|
Adapter
Suction Hose A
Twist pet hair attachment cuff until it locks
Caution: Before using the suction hose B,
Suction Hose Bplease make sure the handle is reattached on the body.
1 Press the release button C to disconnect the handle from the vacuum cleaner.
To attach the Pet Hair Attachment, twist the cuff on end of attachment onto the adapter
2 until it locks, then slide adapter into wand or into Suction Hose B.
To remove the Pet Hair Attachment, twist the cuff on end of attachment and pull to
3 release.
WARNING:Do NOT use Pet Hair Attachment on animals, this attachement is intended for household cleaning only.
Hose Attachment
| Suction Hose A | Handle |
Line up notches | Hose Cuff |
|
push hose in till it | Suction Inlet |
|
clicks. |
| |
|
|
9
