Fantom Vacuum FM744H Troubleshooting, Problem, Cause, Remedy, To Order Replacement Filters Call

TROUBLESHOOTING

If there is a problem with the vacuum cleaner, carry out the following checks

to find the cause. If the problem still persists after the checks have been made, do not use the vacuum cleaner to prevent the possibility of an accident occurring. Turn the ON/OFF switch to the "OFF" position, disconnect the power cord from the wall outlet, and contact FANTOM Customer Service at 1-800-275-9251.

Or visit our website at www.fantom.com

Problem		Cause	Remedy
The motor does not operate	The	power cord plug is not	Insert the power	cord plug
when the ON/OFF switch is	securely inserted into the		securely into the	wall
set to the "ON" position.	wall outlet.
			outlet.(refer to page 5 )
Suction force is weak.	The dust compartment is full.		Empty the dust compartment.
			(refer to page 11)
	The	suction hose is blocked.	Remove the blockage.
			(refer to page 13)
	The	nozzle head is blocked.	Remove the blockage.
			(refer to page 13)
	The	filters are dirty.	Clean the filters.
			(refer to page 12)
			(refer to page 17)
	The	nozzle air inlet pipe is	Remove the blockage.
	blocked.		(refer to page 13)
	The bypass vavle is opened.		Remove the blockage.
			(refer to page 13)
The agitator does not	The flat belt is worn or		Replace the flat belt.
operate.	broken.		(refer to page 15)

TO ORDER REPLACEMENT FILTERS CALL 1-800-275-9251

9BF-D-P111-00728 0408-

E

18