AIR DRIVEN TURBO BRUSH
Using the Unit With Air Driven Turbo Brush
The efficiency of your Air Driven turbo brush depends on the bristle brush rotating at high speed. Strong air suction is needed to accomplish this. In order to ensure that maximum air suction is maintained, please read the following instructions:
1.Always empty the dust cup container frequently during use. Follow instructions on dust container.
2.Ensur that the rotating brush is kept free of hair and string which may accumulate and decrease brush performance.
3.Keep Air Driven Turbo Brush turbine free of dirt and foreign matter. (see illustration below for cleaning instructions.)
Using The Unit With Air Driven Turbo Brush
Your Air Driven turbo Brush may be used with either the extension tubes or the flexible hose.
Cleaning Air Driven Turbo Brush
Locking Latch
Tilt
Upwards
Turbine
From time to time, the turbine of your Turbo Brush will require cleaning. To do this:
1.Remove the turbo brush from the hose or extension tube.
2.Slide locking latch forward then tilt the top housing of the brush upwards. The top housing is
hinged and will tilt up approximately 45 only.
3.There may be some dust, lint, hair, etc on the turbine wheel. Remove as much of this as possible.
4.You may also use the unit's hose with crevice tool attached and use the vacuum to remove any additional debris from the turbine.
5.Ensure that the turbine wheel moves freely by rotating it with your finger. If the turbine does not rotate, call FANTOM Customer Service for help.
6.Once clean, close the top cover of the Turbo Brush and slide the locking latch toward the rear of the brush to lock.
IMPORTANT | TURBO BRUSH INSTRUCTIONS |
The efficiency of your Air Driven Turbo Brush depends on the bristle brush rotating at high speed. Strong air suction is needed to accomplish this.
In order to ensure that maximum air suction is maintained, please read the following instructions:
1)Empty the Dust Container frequently during use. Follow instructions for dust container.
2)Ensure that the rotating brush is kept clear of hair and string.
3)Inspect the turbine regularly to ensure that the air passage is free of dirt and debris.
10
