GETTING TO KNOW YOUR HEDGE TRIMMER
OPERATING INSTRUCTIONS
1. | Rear Handle | 7. | Head Angle Release Button |
2. | Handle Trigger | 8. | Safety Guard |
3. | Safety Switch | 9. | Blades |
4. | Extension Handle | 10. | Blade Cover |
5. | Front Hand Grip | 11. | Cord Holder |
6. | Extension Handle Lock | 12. | Power Cord |
| Illustrations may differ from actual product. | ||
Technical Specifications |
|
| |
Voltage: | 120V., 60Hz. |
|
|
Power: | .65 Amp |
|
|
Extension Handle Adjustment
WARNING: Remove the plug from the power source before
making adjustments to the hedge trimmer. This will help prevent accidental starting of the unit which could result in serious injury.
The handle length on this unit can be varied allowing you to reach difficult places without the use of a ladder. To adjust the length:
1.Grip the head of the hedge trimmer firmly and lift the extension handle lock. (Fig. 1)
2.Pull the extension handle to the desired length.
3.When you have the length that you want, press the handle lock down firmly to lock the extension handle in place. (Fig. 1)
4.When you have finished using the hedge trimmer, lift the extension handle lock and retract the handle before storing.
Starting & Stopping The Hedge Trimmer
The Hedge Trimmer is designed with a safety switch to prevent accidental starting of the unit.
To start the hedge trimmer:
1.Remove the blade cover.
2.Connect the power plug into the electrical outlet.
3.Press the and hold the safety switch on the side of the handle, then press the handle trigger. (Fig. 2)
4.Continue to press on the handle trigger and release the safety switch.
5.To stop the blades, release the
handle trigger.
IMPORTANT: When releasing the handle trigger, wait for the blades to stop completely before removing your hands from the handle.
Extension
Handle Lock
Fig. 1
Safety
Switch
Handle
Trigger
Fig. 2
4 |
5
