RESTRICTED USE ONLY Fargo Electronics, Inc.
Persona C30 Card Printer User Guide (Rev. 2.2) 3-12
Flipper Table Module Installation
Additional, related links are provided below:
See the Flipper Table Module Assembly Problems procedures.
See the Print Both Sides option in the Using the Device Options tab (C30) section.
See the Front and Back radio buttons in the Using the Overlay / Print Area tab (Persona
C30) section.
See the Front and Back radio buttons in the Using the K Panel Resin tab (C30) section.

Installing the Flipper Table Module Assembly (D900200)

Step Description
1
Caution: Turn off the Printer and unplug the power cord from the
Printer.
2 Remove the Rear Cover (D90066) to the Printer.