Table of Contents, Introduction | FARGO electronic DTC400, DTC300M

RESTRICTED USE ONLYFargo Electronics, Inc.

Table of Contents

Firmware Upgrade Instructions___________________________________ 3

Introduction __________________________________________________ 3

Requirements ________________________________________________ 3

Safety Messages (review carefully) _______________________________ 4

Downloading Firmware _________________________________________ 5

Placing the Printer in the Firmware Upgrade Mode __________________ 19

Sending the Firmware File _____________________________________ 21

Firmware Upgrade Instructions

Introduction

The DTC400/DTC300/DTC300M Card Printer/Encoders - Firmware Upgrade Document (Rev. 1.3) provides step-by-step procedures for upgrading the Firmware on these Printers.

Requirements

•Windows 32 bit Operating System (XP/2000)

•Internet Access

DTC400/DTC300/DTC300M Firmware Upgrade Document (Rev. 1.3)

3

Image 3

FARGO electronic DTC400, DTC300M manual Table of Contents, Introduction, Requirements, Firmware Upgrade Instructions

Contents

Printer/Encoders - Firmware Upgrade Document Rev DTC400/DTC300/DTC300M CardPart Number L000575 Revision Firmware Upgrade Instructions Table of ContentsIntroduction Requirements Safety Messages review carefully Click on the Start icon on the desktop Downloading FirmwareClick on the Diagnostic Utility, as shown below Procedure Step Procedure Downloading Firmware continued Click on the Yes button, as shown below Procedure Click on the Go button, as shown below Using the drop down menu select the PrinterThis will launch the Fargo Support page Click on the Firmware selection box RESTRICTED USE ONLYFargo Electronics, Inc Downloading Firmware continued RESTRICTED USE ONLYFargo Electronics, Inc ProcedureDownloading Firmware continued Step RESTRICTED USE ONLYFargo Electronics, Inc Downloading Firmware continued RESTRICTED USE ONLYFargo Electronics, Inc Downloading Firmware continued RESTRICTED USE ONLYFargo Electronics, Inc Downloading Firmware continued RESTRICTED USE ONLYFargo Electronics, Inc Downloading Firmware continued RESTRICTED USE ONLYFargo Electronics, Inc Downloading Firmware continued RESTRICTED USE ONLYFargo Electronics, Inc Downloading Firmware continued RESTRICTED USE ONLYFargo Electronics, Inc Select the Desktop dropdown menu Click on the .frm fileClick on the Open button, as shown below Placing the Printer in the Firmware Upgrade Mode Upgrade Firmware Send File Now Sending the Firmware File 4The procedure is now completed Sending the Firmware File continued