Fellowes Cordless manual Hardware Requirments, Software Requirments, Get Connected

2 HARDWARE REQUIRMENTS

The Fellowes Ergo Tech Cordless requires a PC-compatible computer with an available USB or PS/2 port. The Ergo Tech Cordless will function as a standard one-button mouse when connected to a Macintosh USB port.

3 SOFTWARE REQUIRMENTS

The Fellowes Ergo Tech Cordless requires Windows 95/98/NT 4.0/2000/ME or XP. Be sure to check the Fellowes website at www.fellowes.com for the latest drivers supporting the latest operating systems. If your system operates using Windows NT 4.0, do not install the Fellowes Easy Point software. The mouse will function using the native drivers in the NT 4.0 operating system.

4 GET CONNECTED

Installing the Software

a. Before installing the Fellowes Easy Point driver, we suggest you check if any other mouse driver is installed in your system. If yes, to avoid conflict with the Fellowes driver, please un-install or remove that driver before installation of the Fellowes Easy Point software.

b. Remember to save your Fellowes Easy Point CD in case you ever need to reinstall the software.

c. The input device will not function properly without installation of the Fellowes Easy Point software. The device will work as a basic mouse as soon as you plug it in, but to make full use of the device, you must install the software.

Turn on the power to your computer:

a. Insert the Fellowes Easy Point CD into your CD-ROM drive. The Fellowes Easy Point software is programmed to Auto Run, however if this function is disabled in your computer please follow the steps outlined on the next page: