RUNNING AN EFFECTS PROCESSOR THRU YOUR LTB
1.Connect speakers, microphones and other equipment to the LTB as before.
2.Next, connect a cord from the EFX jack to the input on the effects processing unit. Return the signal to the LTB by connecting a cord from the output of the effects unit to the AUX IN jack on the LTB.
3.The EFX knob on each channel adjusts the amount of signal sent to the EFX jack where the signal is then sent to the processor.
4.Be sure to turn on the tape deck, keyboard or other instruments and outboard gear before powering up the LTB.
9
