ALL TUBE PREAMP AND POWERAMP GENERATE THAT TONE AS ONLY TUBES CAN
MAGNETIC INTERFERENCE REDUCING CHASSIS ELIMINATES UNWANTED NOISE AND RADIO INTERFERENCE
FENDER SPECIAL DESIGN HIGH PERFORMANCE SPEAKERS
ROAD-WORTHY AND MUSICAL
COMPONENTS, CAPABLE OF HANDLING THE MOST DEMANDING PERFORMANCE SITUATIONS
CONSTRUCTED FROM HAND- SELECTED WOODS, EMPLOYING RUGGED CORNER JOINERY FOR ENDURING RELIABILITY
COVERED IN GENUINE TOLEX® FOR LONG LIFE AND LASTING GOOD LOOKS
VIBRO-KING®INTRODUCTION
Congratulations on your purchase of a Fender® Vibro-King Professional Tube Amplifier. The Vibro- King is a single channel all tube combo amplifier built entirely using point to point wiring. Moreover, each Vibro-King amplifier is individually hand-crafted from the finest components available and assembled at the Fender Amplifier Custom Shop in Corona, California, USA.
The All-Tube Vibro-King features 3 Reissue “Blue Frame” 10" speakers with Alnico Magnets speakers and is rated at 60 Watts R.M.S. into 2Ω . Furthermore, the Dwell, Mix and Tone knobs control the all-tube reverb allowing a “custom” designed reverb tone. Still, the footswitch offers the ability to remotely switch on and off both the Vibrato and Fat features. With the built-in effects loop, adding an external signal processor is a snap.
Designed for the most discriminating of guitarists, the Vibro-King produces tones ranging from the crystal clean to a smooth yet smooth overdriven crunch. Couple the Vibro-King with the optional Vibro-King 212 Enclosure and you have an amplifier that is undoubtedly The King of Tone.
In order to thoroughly understand the operation, features and functions of your Fender® Vibro-King®Professional Tube Amplifier, please read and refer as needed to this operation manual. By doing so, your amplifier is sure to provide you with years of trouble- free music making and maximum playing enjoyment.