Fender PDP-125, PDP-S50 D P S p e a k e r S y s t e m s, PDP-1 Passive Presentation Loudspeakers

10 P D P S p e a k e r S y s t e m s

Thank you for purchasing your PDP Speaker System from Fender® Audio. We are sure you will find it both a unique and effective sound reinforcement product, providing years of trouble-free service. PDP–125 / PDP–1 speakers are sheilded to prevent them from interfering with your plasma display or other nearby electronics.

PDP-1 Passive Presentation Loudspeakers

•Perfect for use in all audio general applications where a passive loudspeaker is needed.

•Complete with wall mount kit.

•Attractive silver or black anodized aluminum enclosure.

•Frequency Response - 150-20KHz (±3dB).

•Power Handling - 40 Watts each (RS426B).

•Impedance - 8Ω.

•weight 8.7 lbs each (4kg).

•Dimensions (HxWxD) - 24" (610mm) x 5" (127mm) x 4.13" (105mm ).

PDP-125 Powered Presentation Loudspeakers

•Perfect for use in all audio general applications where a powered speaker is needed.

•Complete with wall mount kit.

•Attractive silver or black anodized aluminum enclosure.

•Frequency Response - 150-20KHz (±3dB).

•Power - 20 Watts RMS each channel.

•weight 9.25 lbs each (4.5kg).

•Dimensions (HxWxD) - 24" (610mm) x 5" (127mm) x 4.13" (105mm).

PDP-S50

•Perfect for use in all audio general applications where a small powered subwoofer is needed.

•Attractive silver or black enclosure.

•Frequency Response - 45-150Hz (±3dB).

•Power - 50Watts RMS.

•weight 30lbs.

•Dimensions (HxWxD) - 15.6" (397mm) x 12.5" (318mm) x 10" (254mm).

INSTALLATION:

To mount your PDP speaker system properly, you will need the following tools and hardware available at your local hardware store:

-Electric drill.

-Philips screwdriver.

-8, #8, 2 1/2 inch, round, washer-head screw.

-stud-finder.

Use the stud finder to find a metal or wooden stud in the wall. Fasten each bracket to the wall using the screw configuration shown in the picture (right). It may be easier to drill a small 1/8” pilot hole for each screw before fastening the screws. When the brackets are secured to the wall, attach the speakers with the supplied knobs as depicted in the picture.

WARNING: Failure to follow these directions may mean that your speaker system is not securely attached to the wall and could create a falling hazard. If you have any apprehension or confusion about the directions in this section, contact a professional installer.

✧ f e n d e r . c o m ✧