LUBRICATION
Lubricate the unit at the locations shown in Figures 4 through 6 as well as the following lubrication points.
Grease:
•front caster wheel axles
•front caster wheel pivots
•blade spindles
•clutch plate pivots
•brake arm pivots
Use grease fittings when present. Disassemble parts to apply grease to moving parts when grease fittings are not installed.
Not all greases are compatible. Ferris Red Grease (P/N 22285) is recommended,
Oil:
•operator presence handle pivots
•steering lever pivots
•clutch lock lever pivots
•discharge chute pivots
Generally, all moving metal parts should be oiled where contact is made with other parts. Keep oil and grease off belts and pulleys. Remember to wipe fittings and surfaces clean both before and after lubrication.
Regular Maintenance
Figure 4. Handle Bar Pivots & Gearbox Couplers
Figure 5. Brake Levers & Clutch Plate Pivots
Figure 6. Mower Deck Lubrication Points
15
