►Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool.
►Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the
particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended can be hazardous.
Service
►Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
►When servicing a tool, use only identical replacement parts. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.
Specific Safety Rules for Tenon Joiners
!WARNING: Risk of personal injury.
►Keep hands away from the cutting area. Never place your hand on the front face of the fence while the tool is running.
►Never operate the joiner without the fence attached. When the fence is removed from the joiner, the spinning and oscillating cutter is exposed and can cause serious injury.
►Use only Festool authorized mortising bits.
►Never use dull or damaged mortising bits. Dull or damaged mortising bits can cause the tool to lurch sideways unexpectedly and lead to a loss of control of the power tool.
►Do not operate the tool if the
mortising bit and prevents accidental contact. If the slides of the fence do not move freely, have the tool serviced immediately.
►Wait for the cutter to stop before setting the tool down. An exposed cutter may engage the surface leading to possible loss of control and serious injury.
►Use clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.
►Wear eye and hearing protection. Always use safety glasses. Every day eyeglasses are NOT safety glasses. USE CERTIFIED SAFETY EQUIPMENT. Eye protection equipment should comply with ANSI Z87.1 standards. Hearing equipment should comply with ANSI S3.19 standards.
Respiratory Exposure Warning
Various dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
►lead from
►crystalline silica from bricks, cement, and other masonry products,
►arsenic and chromium from
The risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Tool Description
Technical Specifications
Power Consumption | 420 Watts (3.5 amps @ 120 volts) |
Motor Speed | 24,300 RPM (no load) |
Mortising Depth, Max. | 28mm (1.1“) |
Mortising Width, Max. | 23mm (0.9”) + bit diameter |
Mortising Bit Range | 5mm, 6mm, 8mm, 10mm |
Spindle Thread | M6 x 0.75 |
Weight | 3.2 kg (7 lbs) |
All metric dimensions are binding. Mortising bit dimensions are critical for safe operation, and are presented in metric units only.
Symbols
V | Volts |
|
|
W | Watts |
|
|
Hz | Hertz |
|
|
~ | Alternating Current (AC) |
|
|
no | |
|
|
Ø | Diameter |
|
|
| Class II Double Insulated |
|
|
Intended Use
The Domino tenon jointer is designed to produce mortises in soft and hard wood, chip board, plywood
and fiber boards. All applications beyond this are regarded as improper use. The tool should not be altered or used for any other purpose other than as specified in these operating instructions. Using the tool in contravention to this manual will void your warranty and may lead to injury. The user shall be responsible and liable for damages and accidents resulting from misuse or abuse of this tool.
Instruction Manual | 5 |
