end piece to secure the mounting plate. Note: The two cams (3.6) must slot into the groove (3.7).
3.2Cross brace
Secure the cross member (1.13) to the stop profile.
–Slide the slot nut (4.2) into the stop profile (4.1).
4.14.2
sembly instructions).
–Insert a clamp (6.3) in the hole (6.1) to secure the cross brace (6.2) to the MFT. Do not tighten yet!
6.1 |
6.2
4.3
6.3
44.4
2.4Stop profile
Secure the stop profile to the bench for the bracket support
5.15.2
|
|
|
|
|
|
|
| 5.5 |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
5 | 5.4 | 5.3 | ||||
|
|
|
|
|
| |
–Insert the rotary knob (5.4) through the hole (5.5) in the bracket support bench and secure the slot nut (5.2). Do not tighten the knob yet – you must be able to lift the slot nut approx. 0.2 in. above the bracket support.
–Slide the stop profile (5.1) onto the slot nut (5.2) until the stop profile is flush with the edge of the bench (5.3).
–Fit the bracket support bench to the KS 120 (see bracket support assembly instruc- tions).
–Align the bracket support bench so that the stop profile is flush with the stop ruler on the KS 120. Clamp the bracket support bench in place (see bracket support as-
6
–Tighten the rotary knob (5.4).
–Now tighten the connections on the cross braces (4.4) and (6.3).
2.5Tape measure, tape measure
clamp
7.1 | 7.2 | 7.3 7.4 |
7
–Insert the tape measure (7.1) into the extendable end piece.
–Guide the tape measure (7.2) through the top grooves on the extendable end piece, the adjustable spacer and the stop profile in succession.
–Unscrew the rotary knob (7.4) for the tape measure clamp.
–Insert the slot nut for the tape measure clamp into the slot (7.3) on the stop pro- file.
3
