Festool PI567696, PN567696 Electronics RS 2 E, Dust extraction, Inboard extraction

Electronics (RS 2 E)

The RS 2 E has an electronic control with which the rotational speed can be varied step-free. This allows the sanding speed to be adapted to the op- timum level according to the material concerned.

The speed is set using the rotary control button (2.1). The numbers on the rotary control button

2.1represent approximately the following stroke/ orbit speeds:

Dust extraction

Dust extractors prevent large accumulations of dust in the air in the working environment and dirt collecting in the workplace.

Inboard extraction

The machines are fitted with inbuilt extraction as standard. Push the filter holder (3.3) with its open-

3.1 3.2ing as far as it will go onto the extraction nozzle (3.4) of the machine and clamp tight by turning

rotary knob (3.1).

The sanding dust is extracted through suction openings in the sanding base and trapped in the turbo-filter (3.2). The turbo-filter has to be changed when it is so full of dust that the extrac- tion power diminishes.

3.43.3

	External extraction by an extrac-
	tion unit
	In order to avoid frequent changing of the turbo-
	filter when carrying longer sanding jobs, it is
	possible to connect a Festool extractor to the unit
4.1	instead of using inbuilt extraction. Connect the
	hose (Ø 27 mm (4.1) from a Festool dust extractor

to the extraction outlet on the tool (4.2).

4.2

6