Systainer (System Container)
Every Festool product is shipped in its own unique system container, called a "Systainer." This provides protection and storage for the tool and accessories. All Systainers are stackable and can be interlocked together, including stacking and locking atop Festool dust extractors.
Parts of the Systainer
► Carrying Handle. The carrying handle folds flat when not in use.
► Cover Latches. The two green latches on the front of the Systainer secure the cover. (These are also used for stacking Systainers, as described below.)
► Stacking Latches. The two gray latches on the sides of the Systainer are used for stacking one or more systainers together.
► Stacking Tabs. The stacking tabs are used to lock two systainers together. There are four sets of tabs (two on the front and two on the sides) of each systainer.
Stacking Systainers
For convenience in transporting Festool tools and accessories, the systainers can be stacked and locked together. The systainers are locked together using the stacking tabs and latches.
1.Place one systainer on top of the other.
2.Release all four latches on the lower systainer by pulling back at their top edges (step A to the right).
3.Slide all four latches upward (step B) as depicted by the two views.
4.Snap all four latches back to their flat position (step C) so they engage the stacking tabs of the upper systainer.
The image to the right shows two accessory systainers stacked together.
Instruction Manual | 23 |
