tools, with sharp cutting edges are less likely to bind and are easier to control.
21 Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
22 Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.
Service
23Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
24When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorised parts or failure to follow Maintenance instructions may create a risk of electric shock or injury.
Various dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
•lead from
•crystalline silica from bricks and cement and other masonry products, and
•arsenic and chromium from chemically- treated lumber.
The risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Technical data
Wattage |
| 260 W |
No load speed |
| 4 000 - 6 000 rpm |
Strokes per minute | 8 000 - 12 000 spm | |
Sanding stroke |
| 4.0 mm (0.16 in.) |
Sanding base | 80 x 130 mm (3.15 x 5.12 in.) | |
Weight |
| 1.7 kg (3.7 lbs) |
Safety level |
| / II acc. to |
| UL 735, CSA C22.2 No. 745 | |
The specified illustrations can be found at the beginning of the operating instructions.
Symbols
V | volts |
A | amperes |
Hz | hertz |
W | watt |
~alternating current
n0 | no load speed (revolutions) |
| Class II Construction |
rpm | revolutions per minute |
spm | strokes per minute |
Thanks to its linear sanding movement, the LS 130 EQ is ideally suited for sanding battens, straight profiles and in rebates.
The machines must not be damp nor operated in a damp environment for electrical safety reasons. The machines may only be used for dry sanding.
The user bears sole responsibility for any damage or accidents resulting from incorrect use.
Electrical connection and operation
The mains voltage must correspond with the voltage on the rating plate!
Always switch the machine off before connecting or disconnecting the power cable!
See Fig. 2 for connection and disconnection of the power cable.
Switch (1.2) is an on/off switch. For continuous use it can be engaged with the lateral locking button (1.1). Pressing the switch again releases the lock.
Intended use | Extension cable |
The tools are designed for sanding wood, plastic, composite materials, paint / varnish, filling material, metal and similar materials.
Material containing asbestos must not be processed with these tools.
If an extension cable is required, it must have
asufficient
5
