DRAFT CONTROL INSTALLATION

See Figure 4 for typical vent system layout.

CAUTION: This draft control is shipped as a single acting draft control. If the draft control is not being used on a gas draft induced furnace, remove the gate stop on the draft control ring before installing.

COLLAR INSTALLATION

This control is shipped with a collar patterned to fit a single wall round vent pipe. To attach this collar to the flue, see Figure 5 and follow the instructions below.

1.Bend outward the two ears at the front corners of the collar. Bend 90 degrees, 1/4 inch behind the single hole on the

straps.

2. Insert clamping screw in ears on collar and bolt the remainder of the collar together.

3. Hold the collar against the side of the flue in the exact position it is to be installed (shown by dotted lines) and mark the outline of the collar on the flue.

4.Cut a hole in the flue about 1/2" inside of this outline.

5.Make a series of cuts about 1/2" apart from the edge of this hole to the outline marks.

6.Strap the collar to the flue pipe.

Figure 4

Figure 5

7.Bend the tabs formed by the series of cuts outward against the inside of the collar to make a tight joint.

8.Refer to Insertion of Draft Control Section.

Page 3

Page 3
Image 3
Field Controls CK-43 installation instructions Draft Control Installation

CK-43 specifications

The Field Controls CK-43 is a cutting-edge ventilation solution designed to enhance indoor air quality and optimize energy efficiency in residential and commercial settings. Known for its robust features and advanced technologies, the CK-43 ensures that spaces stay comfortable and healthy while reducing energy consumption.

One of the standout features of the CK-43 is its innovative demand-controlled ventilation system. This technology intelligently adjusts airflow based on real-time indoor conditions, such as the presence of occupants and the level of indoor air pollutants. By continuously monitoring these parameters, the CK-43 can deliver the precise amount of fresh air needed, eliminating the inefficiencies associated with traditional fixed ventilation systems.

The CK-43 is also equipped with a high-efficiency motor that operates quietly and reliably, ensuring that occupants remain comfortable without disruptive noise. This motor is designed to work seamlessly with the unit's variable speed settings, allowing users to customize airflow levels according to their specific needs. This versatility extends the unit's usability across different environments, from homes to commercial buildings.

Another key characteristic of the CK-43 is its advanced filtration system. The unit is designed to accommodate multiple types of filters, including HEPA filters, which capture a significant percentage of airborne particles, allergens, and contaminants. This ensures that users breathe cleaner air, contributing to better health and well-being indoors.

The CK-43 also features an intuitive control interface, allowing users to easily set their preferences and monitor system performance. This user-friendly design makes it accessible for individuals without extensive technical knowledge, ensuring that everyone can benefit from improved air quality.

Moreover, the CK-43 is built with durability and sustainability in mind. Constructed from high-quality materials, it is designed to withstand the rigors of continuous use while minimizing environmental impact. Its energy-efficient operation not only lowers utility bills but also aligns with modern energy-saving practices.

In summary, the Field Controls CK-43 is an innovative ventilation solution that combines advanced technologies, user-friendly features, and a commitment to improved indoor air quality. With its demand-controlled ventilation, high-efficiency motor, and versatile filtration options, the CK-43 is a vital addition to any space seeking to enhance comfort and health while promoting energy efficiency.