Page 3 of 25 |
3.Hardware Connections
The FieldServer is connected to the ‘BACnet’ port of the FACP as shown in connection drawing.
| CH2 | CH2 | CH1 GND | CH1 | TD RD GND |
| - | + | + - |
| |
| Brown | - Blue/White | Orange/White |
|
|
| RX - | GND | TX - |
|
|
| Pin 1 = | Pin 5 = | Pin 8 = |
|
|
1.02 | Connection Notes |
|
|
|
|
A FACP network consists of up to 32 panels. One of those panels acts as the network interface by means of its ‘BACnet’ interface port. This interface serves data to the FieldServer by means of a serial connection. Each one of these connections requires exclusive use of a FieldServer port. Thus, only one network of FACP’s can be connected to one FieldServer serial port.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)
