| Page 6 of 25 |
Example
//Client Side Connections
Connections
Port, | Protocol, | Baud, | Parity, | NATSfacp_Timeout, | NATSfacp_Status_DA |
P8, | National_Time_Fire, | 9600, | None, | 120s, | DA_NATS_STATUS1 |
1.05Client Side Node Descriptors
Create one node for each panel connected to the National Time & Signal Network. You can have multiple nodes on the same port.
| Section Title |
|
|
|
|
|
|
| Nodes |
|
|
|
|
|
|
| Column Title |
| Function |
|
| Legal Values | |
| Node_Name |
| Provide name for node |
|
| Up to 32 alphanumeric characters | |
| Node_ID |
| This parameter is used to specify |
| |||
|
| the PANEL number. |
|
| |||
|
|
|
|
|
|
| |
| Protocol | Specify protocol used |
|
| National_Time_FACP, | ||
|
|
| National_Time_Fire, natsco_facp | ||||
|
|
|
|
|
| ||
| Connection |
| Specify which port the device is |
|
| ||
|
|
| connected to the FieldServer |
|
|
|
|
| Example |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| // Client Side Nodes |
|
|
|
| ||
| Nodes |
|
|
|
|
|
|
| Node_Name, |
| Node_ID, | Protocol, | Connection | ||
| Panel1, |
| 1, | National_Time_FACP, | P1 | ||
| Panel2, |
| 2, | National_Time_FACP, | P1 | ||
2Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com Tel: (408)
