Lexmark 670, 470, 35S5701, 675, MX510, MX410 Understanding the printer menus 163, Alarms, Timeouts

Understanding the printer menus		163
	Use	To
	Alarms	Set an alarm to sound when the printer requires user intervention.
	Alarm Control	When activated, Alarm Control lets you set the number of times
	Cartridge Alarm	that the alarm sounds, while Cartridge Alarm lets you stop printing
		when a cartridge-low condition occurs.
		For each alarm type, select from the following options:
		Off
		Single
		Continuous
		Notes:
		• Single is the factory default setting for Alarm Control. This
		sounds three quick beeps.
		• Off is the factory default setting for Cartridge Alarm. This
		means no alarm will sound.
		• Continuous repeats three beeps every 10 seconds.
	Timeouts	Specify the number of minutes of inactivity before the printer
	Standby Mode	enters a lower power state.
	Disabled	Note: 15 is the factory default setting.
	1–240
	Timeouts	Set the amount of time in minutes the printer waits after a job is
	Sleep Mode	printed before it goes into a reduced power state.
	Disabled	Notes:
	1–120	• 30 is the factory default setting.
		• Disabled appears only when Energy Conserve is set to Off.
		• Lower settings conserve more energy, but may require
		longer warm‑up times.
		• Select a high setting if the printer is in constant use. Under
		most circumstances, this keeps the printer ready to print
		with minimum warm‑up time.
	Timeouts	Set the amount of time the printer waits before it goes to Hibernate
	Timeout	mode.
	Disabled	Notes:
	1 hour	• Disabled is the factory default setting for printers except in
	2 hours
		European Union countries and Switzerland.
	3 hours
		• “3 days” is the factory default setting for Class B printers in
	6 hours
		European Union countries and Switzerland.
	1 day
	2 days
	3 days
	1 week
	2 weeks
	1 month