Lexmark MX510, 470, 670 Clearing jams, Jam access area, Printer control panel message, What to do

Clearing jams 228

Notes:

•When Jam Assist is set to On, the printer automatically flushes blank pages or pages with partial prints to the standard bin after a jammed page has been cleared. Check your printed output stack for discarded pages.

•When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting does not guarantee that the page will reprint.

	Jam access area	Printer control panel message	What to do
1	Automatic document	[x]‑page jam, open automatic	Remove all paper from the ADF tray, and then remove
	feeder (ADF)	feeder top cover. [28y.xx]	the jammed paper.
2	Standard bin	[x]‑page jam, clear standard	Remove the jammed paper.
		bin. [20y.xx]
3	Front door	[x]‑page jam, open front	Open the front door, then remove the toner cartridge
		door. [20y.xx]	and imaging unit, and then the jammed paper.
4	Multipurpose feeder	[x]‑page jam, clear manual	Remove all paper from the multipurpose feeder, and
		feeder. [250.xx]	then remove the jammed paper.
5	Tray 1	[x]‑page jam, remove tray 1 to	Pull out tray 1 completely, then push the front duplex
		clear duplex. [23y.xx]	flap down, and then remove the jammed paper.
			Note: You may need to open the rear door to clear
			some 23y.xx paper jams.
6	Tray [x]	[x]‑page jam, remove tray	Pull out the indicated tray, and then remove the jammed
		[x]. [24y.xx]	paper.
7	Rear door	[x]‑page jam, open rear	Open the rear door, and then remove the jammed paper.
		door. [20y.xx]