Lexmark 35S5701 Print Settings, Setup menu, Paper Saver Ordering, Separator Sheets, Blank Pages

Understanding the printer menus		190
Paper Saver Ordering	Specify the positioning of multiple‑page images.
Horizontal	Notes:
Reverse Horizontal
	• Horizontal is the factory default setting.
Reverse Vertical
	• Positioning depends on the number of page images and whether they are in portrait or in
Vertical
	landscape orientation.
Separator Sheets	Specify whether blank separator sheets are inserted.
Off	Notes:
Between Copies
	• Off is the factory default setting.
Between Jobs
	• Between Copies inserts a blank sheet between each copy of a print job if Collate is set to
Between Pages
	“(1,2,3) (1,2,3).” If Collate is set to “(1,1,1) (2,2,2),” then a blank page is inserted between
	each set of printed pages, such as after all page 1's and after all page 2's.

•Between Jobs inserts a blank sheet between print jobs.

•Between Pages inserts a blank sheet between each page of the print job. This setting is useful when printing transparencies or when inserting blank pages in a document .

	Separator Sheet Source Specify the paper source for separator sheets.
	Tray [x]	Note: Tray 1 is the factory default setting.
	Multipurpose Feeder
	Blank Pages	Specify whether blank pages are inserted in a print job.
	Do Not Print	Note: Do Not Print is the factory default setting.
	Print
Print Settings
Setup menu
	Use		To
	Printer Language		Set the printer language.
	PCL Emulation		Notes:
	PS Emulation
			• PCL Emulation is the factory default setting.
			• Setting a printer language as the default does not prevent a
			software program from sending print jobs that use another
			printer language.
	Job Waiting		Specify that print jobs be removed from the print queue if they
	On		require unavailable printer options or custom settings.
	Off		Print jobs removed from the print queue are stored in a separate
			print queue, so other jobs print normally. When the missing
			information or options are obtained, the stored jobs print.
			Notes:
			• Off is the factory default setting.
			• This menu setting appears only when a formatted, working
			printer hard disk is installed. This requirement ensures that
			stored jobs are not deleted if the printer loses power.