Lexmark MX510, 470, 35S5701, 670, 675, MX410 Eco-Mode, ADF Loaded Beep, Quiet Mode, Run Initial setup

Understanding the printer menus 158

Use

Eco-Mode

Off

Energy

Energy/Paper

Paper

ADF Loaded Beep

Enabled

Disabled

Quiet Mode

Off

On

Run Initial setup

Yes

No

To

Minimize the use of energy, paper, or specialty media.

Notes:

•Off is the factory default setting. This resets the printer to its factory default settings.

•Energy minimizes the power used by the printer. Performance may be affected, but print quality is not.

•Energy/Paper minimizes the use of power and of paper and specialty media.

•Paper minimizes the amount of paper and specialty media needed for a print job. Performance may be affected, but print quality is not.

Specify whether or not the ADF sounds a beep when paper is loaded.

Note: Enabled is the factory default setting.

Reduce the amount of noise produced by the printer.

Notes:

•Off is the factory default setting. This supports the performance specifications for your printer.

•On configures the printer to produce as little noise as possible. This is best suited for printing text and line art.

•Selecting Photo from the printer driver may disable Quiet Mode and provide better print quality and full‑speed printing.

Run the setup wizard.

Notes:

•Yes is the factory default setting.

•After completing the setup wizard by selecting Done at the country or region selection screen, the default becomes No.