Lexmark 35S5701, 470, 670 Block No Name Fax, Banned Fax List, Transmission Log, Receive Error Log

Understanding the printer menus		176
	Use	To
	Block No Name Fax	Enable blocking of incoming faxes sent from devices with no station ID or fax ID
	Off	specified.
	On	Note: Off is the factory default setting.
	Banned Fax List	Enable the list of blocked fax numbers stored in the printer.
		Note: You can enter up to 512 characters.
	Use	To
	Transmission Log	Enable printing of a transmission log after each fax job.
	Print log	Note: “Print log” is the factory default setting.
	Do not print log
	Print only for error
	Receive Error Log	Enable printing of a receive error log following a receive error.
	Print Never	Note: Print Never is the factory default setting.
	Print on Error
	Auto Print Logs	Enable automatic printing of fax logs.
	On	Notes:
	Off
		• On is the factory default setting.
		• Logs print after every 200 fax jobs.
	Log Paper Source	Specify the source of the paper used for printing logs.
	Tray [x]	Note: Tray 1 is the factory default setting.
	Multipurpose Feeder
	Logs Display	Specify whether printed logs display the dialed number or the station name or fax
	Remote Station Name	name returned.
	Dialed Number	Note: Remote Station Name is the factory default setting.
	Enable Job Log	Enable access to the Fax Job log.
	On	Note: On is the factory default setting.
	Off
	Enable Call Log	Enable access to the Fax Call log.
	On	Note: On is the factory default setting.
	Off
	Use	To
	Speaker Mode	Specify the mode of the speaker.
	Always Off	Notes:
	On until Connected
		• On until Connected is the factory default setting. A sound is issued until the fax
	Always On
		connection is made.
		• Always On turns the speaker on.
		• Always Off turns the speaker off.
	Speaker Volume	Control the volume setting.
	High	Note: High is the factory default setting.
	Low