Lexmark MX410DE, 470, 35S5701, 670, 675, MX510 manual Placing separator sheets between copies

Copying 90

3From the home screen, navigate to:

Copy > enter the number of copies > Collate > select the preferred order of pages > > Copy It

Placing separator sheets between copies

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

•The ADF indicator light comes on when the paper is loaded properly.

2If you are loading a document into the ADF tray, then adjust the paper guides.

3From the home screen, navigate to: Copy > Separator Sheets

Note: Set Collate to “1,2,3 ‑ 1,2,3” to place separator sheets between copies. If Collate is set to “1,1,1 ‑ 2,2,2,” then the separator sheets are added to the end of the copy job. For more information, see “Collating copies” on page 89.

4Select one of the following:

•Between Copies

•Between Jobs

•Between Pages

•Off

5Touch > Copy It.

Copying multiple pages onto a single sheet

In order to save paper, you can copy either two or four consecutive pages of a multiple‑page document onto a single sheet of paper.

Notes:

•Make sure to set the paper size to letter, legal, A4, or JIS B5.

•Make sure to set the copy size to 100%.

1Load an original document faceup, short edge first into the ADF tray or facedown on the scanner glass.

Notes:

•Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings) into the ADF tray. Place these items on the scanner glass.

•The ADF indicator light comes on when the paper is loaded properly.

2If you are loading a document into the ADF tray, then adjust the paper guides.