Lexmark 670, 470, 35S5701, 675, MX510, MX410DE manual IPv6 menu, Understanding the printer menus 149

Understanding the printer menus		149
	Use	To
	Netmask	View or change the current TCP/IP netmask.
	Gateway	View or change the current TCP/IP gateway.
	Enable DHCP	Specify the DHCP address and parameter assignment.
	On	Note: On is the factory default setting.
	Off
	Enable RARP	Specify the RARP address assignment setting.
	On	Note: Off is the factory default setting.
	Off
	Enable BOOTP	Specify the BOOTP address assignment setting.
	On	Note: On is the factory default setting.
	Off
	Enable AutoIP	Specify the Zero Configuration Networking setting.
	Yes	Note: Yes is the factory default setting.
	No
	Enable FTP/TFTP	Enable the built-in FTP server, which lets you send files to the printer using File Transfer
	Yes	Protocol.
	No	Note: Yes is the factory default setting.
	Enable HTTP Server	Enable the built-in Web server (Embedded Web Server). When enabled, the printer
	Yes	can be monitored and managed remotely using a Web browser.
	No	Note: Yes is the factory default setting.
	WINS Server Address	View or change the current WINS server address.
	Enable DDNS	View or change the current DDNS setting.
	Yes	Note: Yes is the factory default setting.
	No
	Enable mDNS	View or change the current mDNS setting.
	Yes	Note: Yes is the factory default setting.
	No
	DNS Server Address	View or change the current DNS server address.
	Backup DNS Server Address	View or change the backup DNS server addresses.
	Backup DNS Server Address 2
	Backup DNS Server Address 3
	Enable HTTPS	View or change the current HTTPS setting.
	Yes	Note: Yes is the factory default setting.
	No

IPv6 menu

To access the menu, navigate to either of the following:

•Network/Ports > Standard Network > Standard Network Setup > IPv6

•Network/Ports > Network [x] > Network [x] Setup > IPv6