Lexmark 35S5701 Loading paper and specialty media, Setting the paper size and type, Loading trays

Loading paper and specialty media 57

Loadingpaperand specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For more information, see “Avoiding jams” on page 226 and “Storing paper” on page 74.

Setting the paper size and type

From the home screen navigate to:

> Paper Menu > Paper Size/Type > select a tray > select the paper size or type >

Configuring Universal paper settings

The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus.

Notes:

•The smallest supported Universal size is 76.2 x 76.2 mm (3 x 3 inches).

•The largest supported Universal size is 215.9 x 359.92 mm (8.5 x 14.17 inches).

1From the home screen, navigate to:

> Paper Menu > Universal Setup > Units of Measure > select the unit of measure >

2Touch Portrait Width or Portrait Height.

3Select the width or height, and then touch .

Loading trays

CAUTION—POTENTIAL INJURY: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed.

1Pull out the tray completely.

Note: Do not remove trays while a job prints or while Busy appears on the printer display. Doing so may cause a jam.