Lexmark MX510 Hardware and internal option problems, Cannot detect internal option, Step, support

Troubleshooting 256

Hardware and internal option problems

Cannot detect internal option

Action	Yes	No
Step 1	The problem is solved.	Go to step 2.

Turn off the printer, then wait for about 10 seconds, and then turn on the printer.

Does the internal option operate correctly?
Step 2		Go to step 3.	Connect the internal
Check if the internal option is properly installed in the controller board.			option to the controller
a	Turn off the printer using the power switch, and then unplug the power		board.
	cord from the electrical outlet.
b	Make sure the internal option is installed in the appropriate connector
	in the controller board.
c	Connect the power cord to the printer, then to a properly grounded
	electrical outlet, and then turn on the printer.
Is the internal option properly installed in the controller board?
Step 3		Go to step 4.	Reinstall the internal
Print a menu settings page, and then check to see if the internal option is			option.
listed in the Installed Features list.
Is the internal option listed in the menu settings page?
Step 4		The problem is solved.	Contact customer
a	Check if the internal option is selected.		support.
	It may be necessary to manually add the internal option in the printer
	driver to make it available for print jobs. For more information, see
	“Updating available options in the printer driver” on page 47.

bResend the print job.

Does the internal option operate correctly?

Internal Solutions Port does not operate correctly

Action	Yes	No
Step 1	Go to step 2.	Check if you have a
Make sure the Internal Solutions Port (ISP) is installed.		supported ISP.
a Install the ISP. For more information, see “Installing an Internal		Note: An ISP from
Solutions Port” on page 31.		another printer may
b Print a menu settings page, and then check if the ISP is listed in the		not work on this
		printer.
Installed Options list.
Is the ISP listed in the Installed Options list?