Lexmark 470, 35S5701, 670, 675, MX510, MX410DE manual Understanding the printer menus 175

Understanding the printer menus		175
	Use	To
	Auto Reduction	Scale an incoming fax job so that it fits the size of the paper loaded in the designated
	On	fax source.
	Off	Note: On is the factory default setting.
	Paper Source	Specify the paper source for printing incoming fax jobs.
	Auto	Note: Auto is the factory default setting.
	Tray [x]
	Multipurpose Feeder
	Sides (Duplex)	Enable two‑sided (duplex) printing for incoming fax jobs.
	Off	Notes:
	On
		• Off is the factory default setting.
		• This menu item appears only when a print duplexer is installed.
	Separator Sheets	Enable the printer to include separator sheets for incoming fax jobs.
	Off	Note: Off is the factory default setting.
	Before Job
	After Job
	Separator Sheet Source	Specify where the printer will pick the separator sheet.
	Tray [x]	Note: Tray 1 is the factory default setting.
	Multipurpose Feeder
	Fax Footer	Print the transmission information at the bottom of each page from a received fax.
	On	Note: Off is the factory default setting.
	Off
	Max Speed	Specify the maximum speed in baud at which faxes are received.
	2400	Note: 33600 is the factory default setting.
	4800
	9600
	14400
	33600
	Fax Forwarding	Enable forwarding of received faxes to another recipient.
	Print	Note: Print is the factory default setting.
	Print and Forward
	Forward
	Forward to	Specify the type of recipient to which faxes will be forwarded.
	Fax	Notes:
	E‑mail
		• Fax is the factory default setting.
	FTP
		• This menu item is available only from the Embedded Web Server.
	LDSS
	eSF
	Forward to Shortcut	Enter the shortcut number which matches the recipient type (Fax, E-mail, FTP, LDSS,
		or eSF).
		Note: You can enter up to 16 characters.