Lexmark MX410DE, 470, 35S5701, 670 Scenario 4 Digital telephone service through a cable provider

Faxing 111

Scenario 4: Digital telephone service through a cable provider

Setup 1: Printer is connected directly to a cable modem

1Connect one end of the telephone cable that came with your printer to the port of the printer.

2Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem.

Note: The port labeled Phone Line 2 or Fax Port is not always active. VoIP providers may charge additional cost for activation of the second phone port.

3Connect your analog telephone phone to the port of the printer.

Notes:

•To make sure that the telephone port on the cable modem is active, plug an analog telephone into the telephone port, and then listen for a dial tone. If you hear a dial tone, then the port is active.

•If you need two telephone ports for your devices, but do not want to pay additional cost, then do not plug the printer into the second telephone port. You can use a phone splitter. Plug the phone splitter into the Phone Line 1 or Phone Port, and then plug the printer and telephone into the splitter.

•Make sure you use a phone splitter, not a line splitter. To make sure that you are using the correct splitter, plug an analog telephone into the splitter and then listen for a dial tone.